Prepar3DV4 Compatibility
- martin[flytampa]
- Site Admin
- Posts: 5058
Prepar3DV4 Compatibility
listed here. When extracting the ZIP files, it will ask to overwrite/replace existing files. If it does not ask to replace, that means you are extracting them in the wrong folder.
Amsterdam
http://www.flytampa.org/dwl/EHAM_P3Dv4_Patch.zip
Install Notes: Run the FlyTampa-Config-Tool and make sure to select "East" under Amsterdam Airport setup. You can change that option again after applying the Update files.
Extract ZIP to Prepar3D/FlyTampa/
Delete: Prepar3D/FlyTampa/Amsterdam/scenery/ 8 files named ******_papi.bgl
Corfu Feb 28 2019
P3Dv4 version: http://www.flytampa.org/dwl/FlyTampa_Un ... _Setup.exe
Sydney
http://www.flytampa.org/dwl/YSSY_P3Dv4_Patch.zip
Extract ZIP to Prepar3D/FlyTampa/
or manually copy the BGL files to Sydney\scenery
Delete: Prepar3D/FlyTampa/Sydney/scenery/ 6 files named PapiHalos*****.bgl
Toronto Feb 28 2019
P3Dv4 version: http://www.flytampa.org/dwl/FlyTampa_Un ... _Setup.exe
Copengagen
http://www.flytampa.org/dwl/EKCH_P3Dv4_Patch.zip
Install Notes: Run the FlyTampa-Config-Tool and make sure to select "North-East winds" under Copenhagen Airport operations. You can change that option again after applying the Update files.
Extract ZIP to Prepar3D/FlyTampa/
Delete: Prepar3D/FlyTampa/Copenhagen/scenery/ 5 files named ******_papi.bgl
Montreal Feb 28 2019
P3Dv4 version: http://www.flytampa.org/dwl/FlyTampa_Un ... _Setup.exe
Dubai-Rebooted
http://www.flytampa.org/dwl/OMDB_P3Dv4_Patch.zip
Extract ZIP to Prepar3D/FlyTampa/
Delete: Prepar3D/FlyTampa/Dubai/scenery/ 4 files named ******papi.bgl
Athens Re-Uploaded August 31
http://www.flytampa.org/dwl/LGAV_P3Dv4_Patch.zip
Extract ZIP to Prepar3D/FlyTampa/
Delete: Prepar3D/FlyTampa/Athens/scenery/ 4 files named ******-papi.bgl
Tampa-Rebooted
http://www.flytampa.org/dwl/KTPA_P3Dv4_Patch.zip
Install Notes: Run the FlyTampa-Config-Tool and make sure that "3D Grass" is enabled. You can switch it off again after applying the Update files.
Extract ZIP to Prepar3D/FlyTampa/
Delete: Prepar3D/FlyTampa/Tampa/scenery/ 6 files named ******papi.bgl
Buffalo
http://www.flytampa.org/dwl/KBUF_P3Dv4_Patch.zip
Install Notes: Run the FlyTampa-Config-Tool and make sure that "3D Grass" is enabled. You can switch it off again after applying the Update files.
Extract ZIP to Prepar3D root folder, not the FlyTampa subfolder like the other Patches.
Grenadines
Not recommended that you install Grenadines at this point, as it will not work. If you have installed it already and something else isn't working, go into the Prepar3D V4/Autogen folder, and restore the backup file default.xml(before_FlyTampa_Grenadines) to default.xml.
KaiTak Feb 28 2019
P3Dv4 version: http://www.flytampa.org/dwl/FlyTampa_Un ... _Setup.exe
StMaarten Feb 28 2019
P3Dv4 version: http://www.flytampa.org/dwl/FlyTampa_Un ... _Setup.exe
Vienna Feb 28 2019
P3Dv4 version: http://www.flytampa.org/dwl/FlyTampa_Un ... _Setup.exe
Midway
http://www.flytampa.org/dwl/KMDW_P3Dv4_Patch.zip
Install Notes: Run the FlyTampa-Config-Tool and make sure that "3D Grass" is enabled. You can switch it off again after applying the Update files.
Extract ZIP to Prepar3D/FlyTampa/
Delete: Prepar3D/FlyTampa/Midway/scenery/ 7 files with the named ******_papi_lights.bgl
Libraries Jan 4 2018
http://www.flytampa.org/dwl/FlyTampa_Co ... es_P3D.exe
These ZIP updates get added to the latest version of each airport, current versions are Amsterdam
http://www.flytampa.org/dwl/EHAM_P3Dv4_Patch.zip
Install Notes: Run the FlyTampa-Config-Tool and make sure to select "East" under Amsterdam Airport setup. You can change that option again after applying the Update files.
Extract ZIP to Prepar3D/FlyTampa/
Delete: Prepar3D/FlyTampa/Amsterdam/scenery/ 8 files named ******_papi.bgl
Corfu Feb 28 2019
P3Dv4 version: http://www.flytampa.org/dwl/FlyTampa_Un ... _Setup.exe
Sydney
http://www.flytampa.org/dwl/YSSY_P3Dv4_Patch.zip
Extract ZIP to Prepar3D/FlyTampa/
or manually copy the BGL files to Sydney\scenery
Delete: Prepar3D/FlyTampa/Sydney/scenery/ 6 files named PapiHalos*****.bgl
Toronto Feb 28 2019
P3Dv4 version: http://www.flytampa.org/dwl/FlyTampa_Un ... _Setup.exe
Copengagen
http://www.flytampa.org/dwl/EKCH_P3Dv4_Patch.zip
Install Notes: Run the FlyTampa-Config-Tool and make sure to select "North-East winds" under Copenhagen Airport operations. You can change that option again after applying the Update files.
Extract ZIP to Prepar3D/FlyTampa/
Delete: Prepar3D/FlyTampa/Copenhagen/scenery/ 5 files named ******_papi.bgl
Montreal Feb 28 2019
P3Dv4 version: http://www.flytampa.org/dwl/FlyTampa_Un ... _Setup.exe
Dubai-Rebooted
http://www.flytampa.org/dwl/OMDB_P3Dv4_Patch.zip
Extract ZIP to Prepar3D/FlyTampa/
Delete: Prepar3D/FlyTampa/Dubai/scenery/ 4 files named ******papi.bgl
Athens Re-Uploaded August 31
http://www.flytampa.org/dwl/LGAV_P3Dv4_Patch.zip
Extract ZIP to Prepar3D/FlyTampa/
Delete: Prepar3D/FlyTampa/Athens/scenery/ 4 files named ******-papi.bgl
Tampa-Rebooted
http://www.flytampa.org/dwl/KTPA_P3Dv4_Patch.zip
Install Notes: Run the FlyTampa-Config-Tool and make sure that "3D Grass" is enabled. You can switch it off again after applying the Update files.
Extract ZIP to Prepar3D/FlyTampa/
Delete: Prepar3D/FlyTampa/Tampa/scenery/ 6 files named ******papi.bgl
Buffalo
http://www.flytampa.org/dwl/KBUF_P3Dv4_Patch.zip
Install Notes: Run the FlyTampa-Config-Tool and make sure that "3D Grass" is enabled. You can switch it off again after applying the Update files.
Extract ZIP to Prepar3D root folder, not the FlyTampa subfolder like the other Patches.
Grenadines
Not recommended that you install Grenadines at this point, as it will not work. If you have installed it already and something else isn't working, go into the Prepar3D V4/Autogen folder, and restore the backup file default.xml(before_FlyTampa_Grenadines) to default.xml.
KaiTak Feb 28 2019
P3Dv4 version: http://www.flytampa.org/dwl/FlyTampa_Un ... _Setup.exe
StMaarten Feb 28 2019
P3Dv4 version: http://www.flytampa.org/dwl/FlyTampa_Un ... _Setup.exe
Vienna Feb 28 2019
P3Dv4 version: http://www.flytampa.org/dwl/FlyTampa_Un ... _Setup.exe
Midway
http://www.flytampa.org/dwl/KMDW_P3Dv4_Patch.zip
Install Notes: Run the FlyTampa-Config-Tool and make sure that "3D Grass" is enabled. You can switch it off again after applying the Update files.
Extract ZIP to Prepar3D/FlyTampa/
Delete: Prepar3D/FlyTampa/Midway/scenery/ 7 files with the named ******_papi_lights.bgl
Libraries Jan 4 2018
http://www.flytampa.org/dwl/FlyTampa_Co ... es_P3D.exe
- JSilva3284
- Posts: 2
Re: Prepar3DV4 Compatibility Updates
Already Prepar3D. Thanks.
- mohammedkaafar
- Posts: 32
Re: Prepar3DV4 Compatibility Updates
great job, but are you going to update the installers as well?
- martin[flytampa]
- Site Admin
- Posts: 5058
Re: Prepar3DV4 Compatibility Updates
At some point yes, but probably not anytime soon.mohammedkaafar wrote:great job, but are you going to update the installers as well?
- olsbluesfan
- Posts: 28
Re: Prepar3DV4 Compatibility Updates
Can we update these now or wait till V4? Thanks.
- martin[flytampa]
- Site Admin
- Posts: 5058
Re: Prepar3DV4 Compatibility Updates
These are V4 compatibility Updates only, they shouldn't be applied to V3 or FSX. We are only testing these for V4 compatibility at this point.olsbluesfan wrote:Can we update these now or wait till V4? Thanks.
- mohammedkaafar
- Posts: 32
Re: Prepar3DV4 Compatibility Updates
Does this mean that we need to point p3d v3 installers to p3d v4 folder to install flytampa sceneries?
Re: Prepar3DV4 Compatibility Updates
Excellent! Thank you for your amazing support FlyTampa!
- windowseat73
- Posts: 2
Re: Prepar3DV4 Compatibility Updates
Wow awesome, thanks for this.
Will you be doing TPA, MDW and BOS as well? These are some of my favorite sceneries, especially MDW as it's my home airport:-)
John
Will you be doing TPA, MDW and BOS as well? These are some of my favorite sceneries, especially MDW as it's my home airport:-)
John
- george[flytampa]
- Site Admin
- Posts: 3307
Re: Prepar3DV4 Compatibility Updates
The old BOS doesn't work at all in P3D but there is a new version coming out later this year.windowseat73 wrote:Wow awesome, thanks for this.
Will you be doing TPA, MDW and BOS as well? These are some of my favorite sceneries, especially MDW as it's my home airport:-)
John
viewtopic.php?f=1&t=10289
TPA & MDW are up to Martin. Montreal patch is coming soon followed by Athens.
- windowseat73
- Posts: 2
Re: Prepar3DV4 Compatibility Updates
Thanks for the info George. For what it's worth, I've been using the old BOS just fine in v3.xx with no real issues to speak of, but I'm really looking forward to the new one. Looks great!
John
John
Re: Prepar3DV4 Compatibility Updates
So how do we install? Run the installer pointing to v4 directory and then apply the updates afterwards? Thanks.martin[flytampa] wrote:These are V4 compatibility Updates only, they shouldn't be applied to V3 or FSX. We are only testing these for V4 compatibility at this point.olsbluesfan wrote:Can we update these now or wait till V4? Thanks.
- K.S. Weber
- Posts: 7
Re: Prepar3DV4 Compatibility Updates
Fingers crossed TPA and BUF make the cut. TPA is the company namesake after all, isn't it? 

- georgiosgiannoukos
- Posts: 6
Re: Prepar3DV4 Compatibility Updates
I have fsx:se with some flytampa add ons.
Should I reinstall and pointing the p3d v4 ? Or how we do?
Install the latest versions and then apply the zip patches?
Please advise
Should I reinstall and pointing the p3d v4 ? Or how we do?
Install the latest versions and then apply the zip patches?
Please advise