Prepar3DV5 Compatibility

Post Reply
martin[flytampa]
Site Admin
Posts: 5164

Prepar3DV5 Compatibility

Post by martin[flytampa] » Wed Apr 15, 2020 4:48 pm

P3D_Logo_Gray_icon.png
P3D_Logo_Gray_icon.png (26.6 KiB) Viewed 6140 times


Las Vegas

Universal Installer: http://www.flytampa.org/dwl/FlyTampa_Un ... _Setup.exe
VDGS SODE support added

Boston-Rebooted
Universal Installer: http://www.flytampa.org/dwl/FlyTampa_Un ... _Setup.exe
Updated again 19-Apr-2020. VDGS SODE support added

Amsterdam
Install Version 1.1 Filename: FlyTampa_Amsterdam_FSX_P3D_11.exe
During Installation, uncheckmark the Option "Download Configurator and Libraries", instead download last item on this list.
Update: http://www.flytampa.org/dwl/FlyTampa_Am ... _P3Dv5.exe

Corfu
Universal Installer: http://www.flytampa.org/dwl/FlyTampa_Un ... _Setup.exe
Update also adds dynamic lights, SODE wind-responsive windsocks, ground texture updates, RWY change updates

Copenhagen V2
Universal Installer: http://www.flytampa.org/dwl/FlyTampa_Un ... _Setup.exe

Sydney
Install Version 1.2 Filename: FlyTampa_Sydney_FSX_P3D_12.exe
Update: http://www.flytampa.org/dwl/FlyTampa_Sy ... _P3Dv5.exe

Toronto
Universal Installer: http://www.flytampa.org/dwl/FlyTampa_Un ... _Setup.exe

Montreal V2
Universal Installer: http://www.flytampa.org/dwl/FlyTampa_Un ... _Setup.exe

Dubai-Rebooted
Install Version 2.4 Filename: FlyTampa_Dubai_Rebooted_FSX_P3D_24.exe
During Installation, uncheckmark the Option "Download Configurator and Libraries", instead download last item on this list.
Update: http://www.flytampa.org/dwl/FlyTampa_Du ... _P3Dv5.exe

Athens
Install Version 1.6 Filename: FlyTampa_Athens_FSX_P3D_16.exe
Update: http://www.flytampa.org/dwl/FlyTampa_At ... _P3Dv5.exe

Tampa-Rebooted
Install Version 2.4 Filename: FlyTampa_Tampa_Rebooted_FSX_P3D_24.exe
During Installation, uncheckmark the Option "Download Configurator and Libraries", instead download last item on this list.
Update: http://www.flytampa.org/dwl/FlyTampa_Ta ... _P3Dv5.exe

Buffalo
Install Version 1.2 Filename: FlyTampa_Buffalo_FSX_P3D_12.exe
During Installation, uncheckmark the Option "Download and Install Configurator and Libraries", instead download last item on this list.
Update: http://www.flytampa.org/dwl/FlyTampa_Bu ... _P3Dv5.exe

KaiTak
Universal Installer: http://www.flytampa.org/dwl/FlyTampa_Un ... _Setup.exe

StMaarten
Universal Installer: http://www.flytampa.org/dwl/FlyTampa_Un ... _Setup.exe
Updated again 18-Apr-2020. Fixed SABA floating runway, changed ICAO to TNCS.

Vienna
Universal Installer: http://www.flytampa.org/dwl/FlyTampa_Un ... _Setup.exe
Updated again 18-Apr-2020. Fixed missing F Jetways

Midway
Install Version 2.3 Filename: FlyTampa_Midway_FSX_P3D_23.exe
During Installation, uncheckmark the Option "Download Configurator and Libraries", instead download last item on this list.
Update: http://www.flytampa.org/dwl/FlyTampa_Mi ... _P3Dv5.exe

Grenadines
Not compatible.

Libraries
http://www.flytampa.org/dwl/FlyTampa_Co ... es_P3D.exe
Updated Dynamic Light FX for PBR
james008
Posts: 17

Re: Prepar3DV5 Compatibility

Post by james008 » Wed Apr 15, 2020 4:55 pm

I downloaded all of them early today using the universal installer. Do I need to update them? Did you changed anything in the last 6 hours?
martin[flytampa]
Site Admin
Posts: 5164

Re: Prepar3DV5 Compatibility

Post by martin[flytampa] » Wed Apr 15, 2020 5:25 pm

james008 wrote:
Wed Apr 15, 2020 4:55 pm
I downloaded all of them early today using the universal installer. Do I need to update them? Did you changed anything in the last 6 hours?
StMaarten and Vienna were updated in the last 6h.
james008
Posts: 17

Re: Prepar3DV5 Compatibility

Post by james008 » Wed Apr 15, 2020 6:29 pm

martin[flytampa] wrote:
Wed Apr 15, 2020 5:25 pm
james008 wrote:
Wed Apr 15, 2020 4:55 pm
I downloaded all of them early today using the universal installer. Do I need to update them? Did you changed anything in the last 6 hours?
StMaarten and Vienna were updated in the last 6h.
Thanks!

By the way, how can I check which version of any FT scenery I have? I tried to open the scenery manual, inside \doc\ subfolder, but looks like most of the manuals are not indicating current versions (i.e. I just re-downloaded LOWW as v3.1 but its manual is still showing v2.9 on its first page).
Ifikratis
Posts: 45

Re: Prepar3DV5 Compatibility

Post by Ifikratis » Wed Apr 15, 2020 6:56 pm

Thank you very much guys!

Just a small correction. In the installer, the last changelog note that includes P3Dv5 compatibility has the date to 15-Apr-2019 instead of 2020.
martin[flytampa]
Site Admin
Posts: 5164

Re: Prepar3DV5 Compatibility

Post by martin[flytampa] » Wed Apr 15, 2020 11:19 pm

Ifikratis wrote:
Wed Apr 15, 2020 6:56 pm
Thank you very much guys!

Just a small correction. In the installer, the last changelog note that includes P3Dv5 compatibility has the date to 15-Apr-2019 instead of 2020.
thanks, fixed.
alexanderluzajic
Posts: 3

Re: Prepar3DV5 Compatibility

Post by alexanderluzajic » Wed Apr 15, 2020 11:33 pm

martin[flytampa] wrote:
Wed Apr 15, 2020 5:25 pm
james008 wrote:
Wed Apr 15, 2020 4:55 pm
I downloaded all of them early today using the universal installer. Do I need to update them? Did you changed anything in the last 6 hours?
StMaarten and Vienna were updated in the last 6h.
Hey Martin,


Is EHAM and OMDB in works? Let us know. Thanks
emilios[flytampa]
Site Admin
Posts: 1136

Re: Prepar3DV5 Compatibility

Post by emilios[flytampa] » Thu Apr 16, 2020 7:28 am

EHAM is working with the existing installer (.EXE/.DAT method).
Minor (almost un-noticeable) issues in P3Dv5 will be fixed in the coming days.
Aviara
Posts: 7

Re: Prepar3DV5 Compatibility

Post by Aviara » Thu Apr 16, 2020 7:33 am

Hi there,

Thanks for all the work getting all the sceneries done. I am a bit confused about Sydney though. So you'd have to install using the previous (v3) installer and then use the one on this thread?? Is this the actual upgrade or is there one still coming with all the added features like dynamic lighting, etc... that will use the universal installer? Thanks
sweker
Posts: 1

Re: Prepar3DV5 Compatibility

Post by sweker » Thu Apr 16, 2020 8:34 am

Thank you Fly Tampa team!

I have been VERY impressed with your proactive approach to keeping us informed about your products compatibility, and your new install tool! I recall in the past having to email for updated download links, and your new process and tool is superb and works flawlessly!

WELL DONE! Thank you, Steve
alexanderluzajic
Posts: 3

Re: Prepar3DV5 Compatibility

Post by alexanderluzajic » Thu Apr 16, 2020 11:55 am

emilios[flytampa] wrote:
Thu Apr 16, 2020 7:28 am
EHAM is working with the existing installer (.EXE/.DAT method).
Minor (almost un-noticeable) issues in P3Dv5 will be fixed in the coming days.
Hi,

I have old installer but it says missing .DAT file. I tried to Micro but password expired. DO I need fresh installer...?
Thanks
martin[flytampa]
Site Admin
Posts: 5164

Re: Prepar3DV5 Compatibility

Post by martin[flytampa] » Thu Apr 16, 2020 12:02 pm

The DAT file you can download in the EHAM forum section
alexanderluzajic
Posts: 3

Re: Prepar3DV5 Compatibility

Post by alexanderluzajic » Thu Apr 16, 2020 12:28 pm

martin[flytampa] wrote:
Thu Apr 16, 2020 12:02 pm
The DAT file you can download in the EHAM forum section
Thanks Martin....BMT already responded...

Any Idea about Dubai? Would that work same way as EHAM?
Johannes47
Posts: 1

Re: Prepar3DV5 Compatibility

Post by Johannes47 » Thu Apr 16, 2020 1:31 pm

Aviara wrote:
Thu Apr 16, 2020 7:33 am
Hi there,

Thanks for all the work getting all the sceneries done. I am a bit confused about Sydney though. So you'd have to install using the previous (v3) installer and then use the one on this thread?? Is this the actual upgrade or is there one still coming with all the added features like dynamic lighting, etc... that will use the universal installer? Thanks
i have the same question on Sydney for p3d v5 because the update here was not working and i have the version for p3d v4.5
Post Reply