Some jetbrigde can not reach the ai aircraft

Post Reply
SteinarG
Posts: 4

Some jetbrigde can not reach the ai aircraft

Post by SteinarG » Tue Jun 02, 2020 2:41 pm

From the sode log

"[19:09:14.366] WARN SODE.FSLOOP : [AI DETECTION] Jetway 'Jetway 1 GATE_C 10' cannot be docked to (AI: A359 SE-RSA) [IKErrCode=516]
[19:09:14.366] WARN SODE.FSLOOP : [AI DETECTION] => IKErrCode as text: Aircraft Door too high for the Jetway (during Extension) // Aircraft Door out of Jetway Rotation Range //"

[19:09:14.366] WARN SODE.FSLOOP : [AI DETECTION] Static Jetway 'Jetway 2 GATE_C 35' cannot be docked to (AI: B77W HS-TKR) [IKErrCode=512]
[19:09:14.366] WARN SODE.FSLOOP : [AI DETECTION] >>> IKErrCode as text: 'Aircraft Door too high for the Jetway (during Extension)'

This problems are on multiple gates some handle Havy aircraft. So fare have i see this on gate where Airbus A350 and Boeing 777 is parking. I use FSPXAI models installed with AIG AIM/OCI.

What is the point to make jetbrigde some not have the length end hight to can dock to aircraft when tham park on the centerline?
SteinarG
Posts: 4

Re: Some jetbrigde can not reach the ai aircraft

Post by SteinarG » Tue Jun 02, 2020 4:42 pm

Here is some screenshots to show the problem.

And here si the exits on the modell:
[exits]
number_of_exits=3
exit.0=0.0,54.3,-10.05,5.7,0
exit.1=0.0,88.1,-8.35,5.7,0
exit.2=0.1,-58.0,6.60,-4.0,1
Attachments
2020-6-2_23-20-51-445.jpg
2020-6-2_23-20-51-445.jpg (1.05 MiB) Viewed 203 times
2020-6-2_23-20-36-843.jpg
2020-6-2_23-20-36-843.jpg (1.16 MiB) Viewed 203 times
emilios[flytampa]
Site Admin
Posts: 1220

Re: Some jetbrigde can not reach the ai aircraft

Post by emilios[flytampa] » Tue Jun 02, 2020 7:46 pm

below i replicated your shots with Heavy AC. No problems

Either your add-on aircraft have wrong door asignments, or you/AI are not parked correctly at the stop position (ie too far). I can already see on your shot that the AC at C33 is parked too far.
Attachments
jet1.PNG
jet1.PNG (4.07 MiB) Viewed 196 times
jet2.PNG
jet2.PNG (3.81 MiB) Viewed 196 times
jet3.PNG
jet3.PNG (3.62 MiB) Viewed 196 times
jet4.PNG
jet4.PNG (3.77 MiB) Viewed 196 times
SteinarG
Posts: 4

Re: Some jetbrigde can not reach the ai aircraft

Post by SteinarG » Wed Jun 03, 2020 4:35 am

This was not an afcad ore ai aircraft problem. I tryed 15 difrent adjustment with the parkingspott in the afcad file, and that make no difrence at all. And after i extend the length and leg on the jetway with 1meter all jetways docket perfect. But yes, C33 need some adustment to fit FSPX AI Airbus A330-300 perfect. All C gates is sett with help of FSPXAI B777-300ER in the afcad some Johan have made for this scenery. And that is the same modell i have use to fix the problems regarding to gate C34 and C35.

Edit 1.
I will recomand a update some have jetwaysmodell some are 1 ore 2 meter longer, soo all user some have Ai traffic can see aircraft docket perfect with no gap in the jetway modell when docket. Regarding to C33 and Airbus A330-300 ai modell on one of my screenshots earliger in this thred.

Edit 2.
Allso the sode xml file for this scenery need a update regarding to gate C34, C35 and C39 some all have dual jetways. Regarding to Sode SDK must the XML file have FRONT and AFT added to the simobject name in the xml file when a gate have dual jetways.
Post Reply