Heraklion elevation/mesh issue

Post Reply
mattyflyer
Posts: 5

Heraklion elevation/mesh issue

Post by mattyflyer » Wed May 06, 2020 6:44 pm

Hello, i installed Heraklion onto XP11 using universal installer but i have following problems as shown in the attached pictures. If you can help me.. Mo other addons like ortho or SFD, just stock xp11
Attachments
b738 - 2020-05-05 22.58.17.png
b738 - 2020-05-05 22.58.17.png (1.92 MiB) Viewed 1156 times
b738 - 2020-05-05 22.58.12.png
b738 - 2020-05-05 22.58.12.png (2.08 MiB) Viewed 1156 times
b738 - 2020-05-05 22.57.09.png
b738 - 2020-05-05 22.57.09.png (1.42 MiB) Viewed 1156 times
b738 - 2020-05-04 03.30.30.png
b738 - 2020-05-04 03.30.30.png (1.42 MiB) Viewed 1156 times
emilios[flytampa]
Site Admin
Posts: 1369

Re: Heraklion elevation/mesh issue

Post by emilios[flytampa] » Wed May 06, 2020 7:55 pm

First, please make sure that XPlane has this option enabled: 'Runways follow terrain contours'

If you still have issues, check your scenery order, found in C:\X-Plane 11\Custom Scenery\scenery_packs.ini

Please check that the following order exists, if not edit the .ini file in notepad.

SCENERY_PACK Custom Scenery/FlyTampa_Heraklion_0_airport/
SCENERY_PACK Custom Scenery/FlyTampa_Heraklion_0_city/
SCENERY_PACK Custom Scenery/FlyTampa_Heraklion_1_overlays/
SCENERY_PACK Custom Scenery/FlyTampa_Heraklion_2_forests/
SCENERY_PACK Custom Scenery/FlyTampa_Heraklion_2_Photoreal/
SCENERY_PACK Custom Scenery/FlyTampa_Heraklion_3_Mesh/
mattyflyer
Posts: 5

Re: Heraklion elevation/mesh issue

Post by mattyflyer » Thu May 07, 2020 7:11 am

The option is checked, and i use Xorganizer to manage all the sceneries and plugins. I tried to arrange the order you told me but nothing new happened, it is the same situation as before
mattyflyer
Posts: 5

Re: Heraklion elevation/mesh issue

Post by mattyflyer » Thu May 07, 2020 7:43 am

Ok now it seems to be all correct. I will attach some screenshoots.. Let me know if it is correct
Attachments
b738 - 2020-05-07 14.42.38.png
b738 - 2020-05-07 14.42.38.png (2.3 MiB) Viewed 1144 times
b738 - 2020-05-07 14.42.35.png
b738 - 2020-05-07 14.42.35.png (2.66 MiB) Viewed 1144 times
b738 - 2020-05-07 14.42.17.png
b738 - 2020-05-07 14.42.17.png (1.9 MiB) Viewed 1144 times
b738 - 2020-05-07 14.42.15.png
b738 - 2020-05-07 14.42.15.png (1.58 MiB) Viewed 1144 times
b738 - 2020-05-07 14.42.14.png
b738 - 2020-05-07 14.42.14.png (1.92 MiB) Viewed 1144 times
b738 - 2020-05-07 14.42.08.png
b738 - 2020-05-07 14.42.08.png (1.88 MiB) Viewed 1144 times
b738 - 2020-05-07 14.42.05.png
b738 - 2020-05-07 14.42.05.png (2.07 MiB) Viewed 1144 times
b738 - 2020-05-07 14.42.04.png
b738 - 2020-05-07 14.42.04.png (2.55 MiB) Viewed 1144 times
b738 - 2020-05-07 14.41.52.png
b738 - 2020-05-07 14.41.52.png (2.17 MiB) Viewed 1144 times
b738 - 2020-05-07 14.41.50.png
b738 - 2020-05-07 14.41.50.png (1.91 MiB) Viewed 1144 times
emilios[flytampa]
Site Admin
Posts: 1369

Re: Heraklion elevation/mesh issue

Post by emilios[flytampa] » Thu May 07, 2020 8:58 am

It looks ok from here. A bit low on the resolution but that might be related to texture settings and/or camera distance. The elevations looks correct though.
mattyflyer
Posts: 5

Re: Heraklion elevation/mesh issue

Post by mattyflyer » Thu May 07, 2020 11:27 am

Ok perfect, what could i do in order raise the quality of textures like the pictures you have on the product page? Which are of very high definition.
Post Reply